CLEAR PIN/CLEAR PASSWORDJURASSIC SAMSUNG GALAXY YOUNG TOOLInfo:SIM UNLOCK/RELOCK
CLEAR PATTERNDOWNLOAD HERE
JURASSIC SAMSUNG GALAXY YOUNG TOOL
Samsung T999 Unlock Problem Solution!!
PLZ read and fallow the Z3x instructions very very carefully.
=============================================
Also try this:
-Phone Powered Off.
-Connect the phone to S7070 cable
-Power on the phone
-Type *#197328640#
-Go to [1]UMTS->[6]COMMON->[4]DIAG CONFIG and select [2]UART
-Reboot the phone
Thanks
MT TECHNOLOGY
..::reza::..
=============================================
Also try this:
-Phone Powered Off.
-Connect the phone to S7070 cable
-Power on the phone
-Type *#197328640#
-Go to [1]UMTS->[6]COMMON->[4]DIAG CONFIG and select [2]UART
-Reboot the phone
Thanks
MT TECHNOLOGY
..::reza::..
Samsung ROOT Files
Samsung ROOT Files
 i9000 2.3.6 CF ROOT [4 Files] | [dir] | 2012-Nov-21 | |||
| i9100 ROOT [7 Files] | [dir] | 2012-Nov-21 | |||
| i9103 ROOT [2 Files] | [dir] | 2012-Nov-21 | |||
| i9300 CF-ROOT [1 File] | [dir] | 2012-Nov-21 | |||
| N7000 note ROOT [3 Files] | [dir] | 2012-Nov-21 | |||
Samsung Galaxy S - SHW-M110S AnyCall How to upgrade and Root to GingerBread 2.3.5 and unlock by octopusRequirements:
Samsung Galaxy S - SHW-M110S
AnyCall How to upgrade and Root to GingerBread 2.3.5 and unlock by octopusRequirements:
my phone have security code and i cant hard reset it idont know y so i disided to uprgrade and root it (maybe the phone want me to suffer) hahaha
Tools
1. Computer
2. USB Cable for Galaxy S(5310 cable mas maikli mas ok!!!)
3. ODIN 1.3
4. ROM (M110S-Gingerbread-HOME-IMAGE-REV03-VJ04-1944-USER.tar)
5. Tegrak-Kernel-Build-26-for-M110S-VG26.tar
6. octopus box activated sa samsung..... for unlocking the phone (PM lang kay UPLINE wapz)
Links to download the requirements:
Gingerbread 2.3.5 ROM (VJ04) : http://translate.google.com/translat...%3D90126412877 (download 3 file na M110S-Gingerbread-HOME-IMAGE-REV03-VJ04-1944-USER.tar 3 vol... un zip use alzip)
alzip download link
ALZip 7.4 full by tupurr.zip - 4shared.com - online file sharing and storage - download
Tegrak Kernel for VJ04: Tegrak-Kernel-Build-26-for-M110S-VG26.tar - 4shared.com - online file sharing and storage - download
Instructions:
make sure use short cable (like ca-101d 5310 cable)
itry use long cable have problem on connecting sample pic samsung galaxy on the back of my computer use main USB port...
FLASHING
1. Do not Run Kies( install all driver)
2. Download VJ04, Odin 1.3 and Kernel (just use alzip para ma unzip nyo yung file)
3. Do not plug-in any flash drive etc on the computer, only the device.
4. Backup all the files, contact etc to your computer(its up to you)
5. Turn off Galaxy S (m110s)
6. Press On and Home Button at the same time to access download mode (yellow triangle yun na nandoon si Mighty Android )
7. Open ODIN and connect the Galaxy S to the PC (Wait for the Yellow Mark "Ex. [COM:34]"
8. Tick the box beside PDA Button and click the PDA button also
9. Locate the VJ04 (kung saan nyo isinave ang file)
10. Click the Start Button and wait until the message on the box says "Pass"
11. Your Device will reboot (medio matagal relax ka lang mabubuhay din yan)
12. Unplug the Device and check the Firmware under "ABOUT PHONE" (sa settings)
13. Finish Flashing
LAGFIXING (halos same lang din po ng gagawin sa flashing)
1. Turn off the Galaxy S
2. Press and Hold the ON/OFF and HOME button again until you see the yellow triangle
3 Run ODIN again and Connect the Device to the USB (Makikita nyo ulit yung yellow mark na may COM
4. Tick again the box beside PDA Button and click the PDA button also
5. Locate the Tegrak-Kernel-Build-26-for-M110S-VG26.tar (kung saan nyo ulit sya isinave ang file)
6. Click the Start Button and wait until the message on the box says "Pass"
7. The device will be reboot(Hintay lang ulit)
AnyCall How to upgrade and Root to GingerBread 2.3.5 and unlock by octopusRequirements:
my phone have security code and i cant hard reset it idont know y so i disided to uprgrade and root it (maybe the phone want me to suffer) hahaha
Tools
1. Computer
2. USB Cable for Galaxy S(5310 cable mas maikli mas ok!!!)
3. ODIN 1.3
4. ROM (M110S-Gingerbread-HOME-IMAGE-REV03-VJ04-1944-USER.tar)
5. Tegrak-Kernel-Build-26-for-M110S-VG26.tar
6. octopus box activated sa samsung..... for unlocking the phone (PM lang kay UPLINE wapz)
Links to download the requirements:
Gingerbread 2.3.5 ROM (VJ04) : http://translate.google.com/translat...%3D90126412877 (download 3 file na M110S-Gingerbread-HOME-IMAGE-REV03-VJ04-1944-USER.tar 3 vol... un zip use alzip)
alzip download link
ALZip 7.4 full by tupurr.zip - 4shared.com - online file sharing and storage - download
Tegrak Kernel for VJ04: Tegrak-Kernel-Build-26-for-M110S-VG26.tar - 4shared.com - online file sharing and storage - download
Instructions:
make sure use short cable (like ca-101d 5310 cable)
itry use long cable have problem on connecting sample pic samsung galaxy on the back of my computer use main USB port...
FLASHING
1. Do not Run Kies( install all driver)
2. Download VJ04, Odin 1.3 and Kernel (just use alzip para ma unzip nyo yung file)
3. Do not plug-in any flash drive etc on the computer, only the device.
4. Backup all the files, contact etc to your computer(its up to you)
5. Turn off Galaxy S (m110s)
6. Press On and Home Button at the same time to access download mode (yellow triangle yun na nandoon si Mighty Android )
7. Open ODIN and connect the Galaxy S to the PC (Wait for the Yellow Mark "Ex. [COM:34]"
8. Tick the box beside PDA Button and click the PDA button also
9. Locate the VJ04 (kung saan nyo isinave ang file)
10. Click the Start Button and wait until the message on the box says "Pass"
11. Your Device will reboot (medio matagal relax ka lang mabubuhay din yan)
12. Unplug the Device and check the Firmware under "ABOUT PHONE" (sa settings)
13. Finish Flashing
LAGFIXING (halos same lang din po ng gagawin sa flashing)
1. Turn off the Galaxy S
2. Press and Hold the ON/OFF and HOME button again until you see the yellow triangle
3 Run ODIN again and Connect the Device to the USB (Makikita nyo ulit yung yellow mark na may COM
4. Tick again the box beside PDA Button and click the PDA button also
5. Locate the Tegrak-Kernel-Build-26-for-M110S-VG26.tar (kung saan nyo ulit sya isinave ang file)
6. Click the Start Button and wait until the message on the box says "Pass"
7. The device will be reboot(Hintay lang ulit)
[Guide] How to root Samsung Galaxy S Korean Version [SHW-M110S] by Any Call
[Guide] How to root Samsung Galaxy S Korean Version [SHW-M110S] by Any Call
With this guide you will learn how to root Samsung Galaxy S Korean Version [SHW-M110S] by Any Call, After flashing the Gingerbread 2.3.5.
How to root Samsung Galaxy S Korean Version [SHW-M110S] by Any Call
Files Needed :
1- Odin 1.3
2. Kernel File
Lets start :
1- Download files given above.
2- Unplug any USB attached to Computer.
3- Power off the phone.
4- Press and hold Home button with Power button. [Download Mode] then plug USB cable.
6- Run Odin , connect phone in download mode with computer [ Odin will detect]
7- Check the PDA radio button and browse for file. [Tegrak-Kernel-Build-26-for-M110S-VG26.tar]
8- Press start button.
9- Phone will reboot and you got your mission.
Next thing is to install TEGRAK KERNEL
1- Setup wifi and access Android Market.
2- Search and download TEGRAK KERNEL Application, install and run.
3- In TEGRAK KERNEL ” Enable Tegrak Lagfix (all)”.
4- A confirmation message appears , Tap Yes, Phone will reboot after doing some magic it will back by press any key to reboot.
5. Now access TEGRAK KERNEL again and enable rooting.
6- Now your phone is Rooted and have root access.
7- Ready to install SHW-M110S custom rom.
Enjoy
Samsung Galaxy S Korean Version SHW-M110S Custom Roms Collection
GFAN WF07 SP 8 XDA Version
GFAN WF07 SP 6 XDA Version
Specially cooked for XDA members by courtesy of fte9k (Totally English and > 160 SMS Character Limit )
GFAN WF07 SP 8 Chinese Edition
GFAN WF07 SP 7 Chinese Edition
Toddy's ROM TE 2.9
GsmVN WF07 SP1
Zhang WF07
Toddy"s Rom TE 2.5 with SpeedMod Kernel
Toddy"s Rom TE 2.5 with Tegrak Kernel
GFAN WC13 SP4
GSM VN WC13
Zhang WC13
Lidroid rat9 WC13
a) CN
b) CHS
c) English rooted
Toddy's Rom
a) ICS 4.04 TE17
b) TE13
Nakyup WC13
Jacobs3
a) Secure JA31
B) ICS V1.4
Thanks to fte9k & xsenman Sponsor Links
With this guide you will learn how to root Samsung Galaxy S Korean Version [SHW-M110S] by Any Call, After flashing the Gingerbread 2.3.5.
How to root Samsung Galaxy S Korean Version [SHW-M110S] by Any Call
Files Needed :
1- Odin 1.3
2. Kernel File
Lets start :
1- Download files given above.
2- Unplug any USB attached to Computer.
3- Power off the phone.
4- Press and hold Home button with Power button. [Download Mode] then plug USB cable.
6- Run Odin , connect phone in download mode with computer [ Odin will detect]
7- Check the PDA radio button and browse for file. [Tegrak-Kernel-Build-26-for-M110S-VG26.tar]
8- Press start button.
9- Phone will reboot and you got your mission.
Next thing is to install TEGRAK KERNEL
1- Setup wifi and access Android Market.
2- Search and download TEGRAK KERNEL Application, install and run.
3- In TEGRAK KERNEL ” Enable Tegrak Lagfix (all)”.
4- A confirmation message appears , Tap Yes, Phone will reboot after doing some magic it will back by press any key to reboot.
5. Now access TEGRAK KERNEL again and enable rooting.
6- Now your phone is Rooted and have root access.
7- Ready to install SHW-M110S custom rom.
Enjoy
Samsung Galaxy S Korean Version SHW-M110S Custom Roms Collection
GFAN WF07 SP 8 XDA Version
GFAN WF07 SP 6 XDA Version
Specially cooked for XDA members by courtesy of fte9k (Totally English and > 160 SMS Character Limit )
GFAN WF07 SP 8 Chinese Edition
GFAN WF07 SP 7 Chinese Edition
Toddy's ROM TE 2.9
GsmVN WF07 SP1
Zhang WF07
Toddy"s Rom TE 2.5 with SpeedMod Kernel
Toddy"s Rom TE 2.5 with Tegrak Kernel
GFAN WC13 SP4
GSM VN WC13
Zhang WC13
Lidroid rat9 WC13
a) CN
b) CHS
c) English rooted
Toddy's Rom
a) ICS 4.04 TE17
b) TE13
Nakyup WC13
Jacobs3
a) Secure JA31
B) ICS V1.4
Thanks to fte9k & xsenman Sponsor Links
Nexus S Firmware & How to Update:
Nexus S Firmware
This page gathers and collects all of the known stock Google firmware for the Samsung Nexus S. Which firmware you want depends on what device you have. To determine your device, check the sticker behind the battery.
How to Update:
Step 2: Copy this file to the root directory of your Nexus S
Step 3: Power off your device
Step 4: Power your device on, while holding the Volume Up button, followed by Power button
Step 5: By using your volume keys for navigation, go to “Recovery” option and select using “power” button.
Step 6: You’ll see an exclamation mark on your screen. Hold the Power button followed by Volume up button
Step 7: From the Recovery menu, select the update from SD card option and browse to the update.zip that you have copied in step 2. Select the power button to confirm.
Subscribe to:
Posts (Atom)
